Article Index

With the car jacked up in the air, it is a good time to check looseness in the front end due to bad kingpins or worn or loose wheel bearings. This is done my grabbing the wheel, top and bottom, and pushing and pulling on the top and bottom.

Rocking the wheel

John Tedesco is shown rocking the wheel while while Clyde and Fred watch for "play" in the kingpins and wheel bearings. In the photo below, Fred and Randy work on tightening the wheel bearings that were found to be too loose.

Tightening the wheel bearing

Interested in joining our club?        Click here to find out how.

Hawk A Model A Ford Club Meetings are the 4th Tuesday of every month, except December

and start at 7:00 PM at the Hiawatha Community Center.