Article Index

John hammers on the levers while Randy holds the end of the control rod on solid surface. This is supposed to be the preferred method but it did not shear the pins.

Lots of help

Dean shows us how to chisel off the peened head of the pin and then use a pin punch to drive the pin out of the control rod.

Here's a question for you, "How many Hawk A's does it take to change a light bulb?"


Interested in joining our club?        Click here to find out how.

Hawk A Model A Ford Club Meetings are the 4th Tuesday of every month, except December

and start at 7:00 PM at the Hiawatha Community Center.